Armac Propstand
Sick of hunting for a parking place or lying your bike on its side while you walk sections? Unwilling to pay £100+ for a GasGas propstand? Us too!
The Armac Design propstand will save you time and effort trialling, and is designed to be as unobtrusive, lightweight and tucked-in as possible.
SPECIFICATION
-
* Fully TIG welded from seamless Trumech/CF53 tube
-
* Laser cut parts
-
* Stainless steel fasteners
-
* Stainless steel extension spring
PRICE: £50 (Universal Kit £45)
P&P as a single item: £8.50 special delivery or £5 first class
Armac Propstand: has been designed in tandem with the Armac Swinging Arm. When ordered with the swinging arm, we provide it as a welded assembly, with the welding free of charge.
Armac Retro-Fit Propstand Kit: as a retro-fit for Armac swinging arms or standard Tiger Cubs. We supply the propstand as a kit which you can weld to your Armac swinging arm, for the same result as a workshop-finished version. This also works with a standard Tiger Cub, depending on the suspension set-up. If it is too long you can trim the arm and re-weld the foot; or, choose the Universal option.
Armac Universal Propstand Kit: the propstand can be adapted to fit any Pre-65 trials bike, if fitted onto the right-hand side of the swinging arm. It is supplied as a kit without the pivot or base foot welded on, and with the leg longer than normal. This means you can cut it to your required length, then weld on the foot, pivot and mounting bracket at the right angle/place for your bike.
CHOOSING RETROFIT OR UNIVERSAL?
From the underside of the swinging arm to the ground, measured along the line of the stand in the down position, is 42cm. This can be tweaked by altering the angle at which the bracket is welded to the swinging arm.
This product is an original design by Armac Design, created in 2010. It is protected by Copyright and Design Rights and no part can be copied without permission.
Tel: 01751 417371
